Movmax Blade Arm

When using the Blade Arm’s adjustable handle, users may encounter a situation where the handle reaches the end of its adjustment and they do not know how to continue locking. The handle screws should be lifted up and re-turned to the initial position to continue locking. 

When using a vacuum pump, two fingers should be placed on both ends of the vacuum pump instead of applying force to one end only for the suction operation. Incorrect operation may cause slight cracking and air leakage on one side of the vacuum pump, resulting in loss of suction. 

It won’t. Just need when you apply the film, the car protective film does not have defects or quality problems, and the suction cup will not cause damage to it. 

Yes. First, apply a little grease to the top of the vacuum plug, then plug the vacumm bolt back into the vacuum pump and tighten clockwise. It is sufficient to tighten to the bottom without over-tightening. After a similar problem with the suction cup it is recommended to use a safety harness and other safeguards just in case. 

It can be replaced. However, it is necessary for the user to adjust the parameters by himself, and the original product parameters are trade secrets.